Uninterruptible Power Supply Melbourne - UPS Installation, Maintenance & CRAC Cooling

Indigi Power & Cooling is the specialist for UPS installation, UPS maintenance, CRAC cooling systems, and precision data centre cooling across Melbourne and Victoria. Melbourne is Australia's second-largest data centre market, and Indigi is one of the few providers that services the full state - not just the metro. We cover Melbourne CBD, South Melbourne, Port Melbourne, Docklands, Dandenong, West Footscray, Tullamarine, Clayton, and Moorabbin, and extend across Regional Victoria including Gippsland, Loddon Mallee (Bendigo), Barwon South West (Geelong, Warrnambool), the Hume region (Wodonga, Shepparton), and remote industrial sites throughout VIC. If your infrastructure is outside the city, we can reach it.

Part of our national service network - we also operate in Brisbane and Queensland and Sydney and NSW.

---

Melbourne and Victoria Data Centre Market

Melbourne is Australia's second-largest data centre market and one of the fastest growing in the Asia-Pacific region. The city's data centre corridor runs from Port Melbourne through to Tullamarine, with major facilities operated by Equinix, NextDC, and AirTrunk, supported by dense fibre connectivity and proximity to international cable landing stations. Victoria's manufacturing, healthcare, education, and financial services sectors are among the largest consumers of critical power and precision cooling infrastructure in the country.

Melbourne's climate presents a specific challenge for data centre operators. Unlike Brisbane's consistent subtropical heat, Melbourne experiences extreme temperature swings - including prolonged summer heat events that drive external ambient temperatures above 40 degrees Celsius. CRAC cooling systems in Melbourne must be sized and maintained to handle peak summer loads, and UPS battery management is critical during extended heatwaves when grid reliability can be stretched.

Key infrastructure sectors driving demand across Victoria include:

• Data centres and colocation - Port Melbourne to Tullamarine corridor and CBD facilities

• Banking and financial services - Melbourne CBD trading infrastructure and back-office data centres

• Healthcare - major hospital networks, pathology, and research facilities

• Industrial and manufacturing - process control and SCADA across Dandenong, Laverton, and Geelong

• AI and high-density computing - emerging GPU and AI workload facilities

---

UPS Systems Melbourne

Indigi supplies, installs, commissions, and maintains single and three-phase UPS systems across Melbourne from Eaton, Vertiv Liebert, APC by Schneider Electric, PowerShield, and Socomec. The Port Melbourne to Tullamarine data centre corridor and Melbourne's healthcare and financial services sectors demand reliable, enterprise-grade UPS installation - our licensed electricians deliver to Australian Standards with full compliance documentation. Browse UPS systems or learn more about our UPS maintenance services.

---

CRAC Cooling Systems Melbourne

Melbourne's variable climate - including extreme summer heat events that push external temperatures above 40 degrees Celsius - creates serious risks for server rooms and data centres without properly specified precision cooling. A CRAC system under-sized for Melbourne's peak summer conditions can fail to protect equipment during the hours that matter most. Indigi supplies, installs, commissions, and maintains DX, CHW, and CDW CRAC cooling systems across Melbourne and Victoria. Our ARC-licensed refrigeration technicians handle all refrigerant work to full compliance. View CRAC and precision cooling units.

---

UPS and CRAC Services Across Victoria

We cover Melbourne and the full state - including regional and remote Victoria where critical infrastructure demands reliable, on-site support:

• UPS supply and installation Melbourne (single and three-phase)

• UPS preventative maintenance and servicing

• UPS battery replacement and testing

• CRAC unit supply and installation Melbourne

• CRAC maintenance and refrigerant handling (ARC licensed)

• Emergency UPS and CRAC breakdown response

• Design and deployment of integrated power and cooling solutions

• On-site services to Gippsland, Loddon Mallee (Bendigo), Barwon South West (Geelong, Warrnambool), Hume region (Wodonga, Shepparton), and remote industrial sites throughout VIC

---

Why Melbourne Businesses Choose Indigi

• National provider with proven Melbourne project delivery and genuine regional Victoria reach

• Licensed electricians and ARC-licensed refrigeration technicians

• Multi-brand capability: Eaton, Vertiv, APC, PowerShield, Socomec

• Indigenous and Veteran-owned - Supply Nation and ICN Gateway registered

• Procurement-compliant for VIC Government and Commonwealth agencies

---

How to size a UPS for your Melbourne site

Getting UPS sizing right is the difference between a system that rides through an outage and one that trips under load. For Melbourne and Victoria sites we begin with a load audit, then specify capacity, runtime, and redundancy to match your operational risk. The key factors are:

• Connected load - total VA and watts of the equipment to be protected, plus headroom for growth

• Required runtime - how many minutes you need to ride through an outage or reach generator start

• Redundancy - N for basic protection, N+1 or 2N for data centres, hospitals, and other critical sites

• Load type and power factor - IT loads, motors, and medical equipment behave differently under UPS

• Input supply - single or three-phase, and the spare capacity in your switchboard

• Environment - Melbourne's conditions and the room temperature the batteries will actually see

---

Single-phase or three-phase UPS in Melbourne?

Most Melbourne offices, retail sites, branch offices, and small server rooms run single-phase UPS systems from 1kVA to 20kVA in tower or rack-mount form. Data centres, hospitals, and industrial sites across Victoria typically need three-phase UPS from 10kVA up to several hundred kVA, often configured with parallel or N+1 redundancy and paired with precision CRAC cooling. We supply, install, and maintain both, and can advise which topology suits your load, budget, and available switchboard capacity.

---

UPS batteries: VRLA vs lithium

UPS runtime comes from its batteries, and battery choice drives both lifespan and total cost of ownership. Valve-regulated lead-acid (VRLA) batteries are the common, lower-cost option with a typical 3 to 5 year service life. Lithium-ion batteries cost more upfront but commonly last 8 to 10 years, tolerate higher operating temperatures, weigh far less, and recharge faster. In Melbourne's variable climate, summer heat events above 40 degrees Celsius stress both cooling and batteries. Whichever you run, we test battery health at every visit using impedance testing, which detects degradation long before a runtime failure.

---

What a UPS installation in Melbourne involves

A typical UPS installation follows a clear path: site assessment and load audit, system and battery selection, delivery and positioning, electrical connection by a licensed electrician, commissioning and load testing, then handover with full documentation. For occupied Melbourne sites we work around your maintenance windows, and systems fitted with a maintenance bypass switch can often be installed or serviced without interrupting the protected load.

---

Reducing UPS downtime risk in Melbourne

A single unplanned outage can cost thousands in lost productivity, corrupted data, and emergency callout fees. Reactive, emergency repair consistently costs more than planned maintenance - preventive servicing can cost up to three times less than emergency repairs over the life of a UPS system.

For Melbourne and Victoria operations that cannot tolerate downtime, we combine a correctly-sized UPS, precision CRAC cooling, scheduled preventative maintenance, battery impedance testing, and 24/7 emergency response, so a mains failure, a degrading battery, or a cooling fault is detected and resolved before it takes your systems offline. New sites can start with a one-off assessment and move onto a scheduled maintenance plan once we have a baseline health report.

---

Australian standards and compliance

Every UPS and CRAC installation we deliver in Melbourne and Victoria is carried out by licensed electricians and, for cooling, ARC-licensed refrigeration technicians, aligned with the relevant Australian Standards:

• AS/NZS 3000 - Wiring Rules, for safe electrical installation and connection to switchboards

• AS/NZS IEC 62040 - general and safety requirements for uninterruptible power systems

• AS 4044 - safety requirements for stationary battery installations

• AS/NZS 3003 - electrical installations in patient care areas, for hospitals and healthcare

We can provide documentation referencing these standards for insurance, audit, and compliance purposes on request.

Frequently Asked Questions

Do you supply uninterruptible power supply systems in Melbourne?

Yes - Indigi supplies, installs, and commissions single and three-phase uninterruptible power supply (UPS) systems across Melbourne and Victoria from Eaton, Vertiv Liebert, APC, PowerShield, and Socomec, and maintains them under scheduled service agreements.

Do you provide UPS installation in Melbourne?

Yes - we install single and three-phase UPS systems across Melbourne CBD, Port Melbourne, Dandenong, Tullamarine, and throughout Regional Victoria including Geelong, Bendigo, Gippsland, and the Hume region. We supply and install Eaton, Vertiv Liebert, APC, PowerShield, and Socomec.

Do you service CRAC units in Melbourne?

Yes - we supply, install, commission, and maintain DX, CHW, and CDW CRAC cooling systems across Melbourne and Victoria. Our technicians are ARC-licensed for refrigerant handling.

What areas of Victoria do you cover?

We cover Melbourne CBD, South Melbourne, Port Melbourne, Dandenong, West Footscray, Tullamarine, Clayton, and all of Regional Victoria - including Gippsland, Loddon Mallee (Bendigo), Barwon South West (Geelong, Warrnambool), the Hume region (Wodonga, Shepparton), and remote industrial sites throughout the state.

---

Ready to talk to a Melbourne UPS and CRAC specialist? Call 1800 046 344, or send us a message.

Back to Service Locations Australia | Brisbane and Queensland | Sydney and NSW