APC RBC Replacement Battery Cartridges
Genuine APC Replacement Battery Cartridges for Back-UPS, Smart-UPS and Three-Phase Systems
When your APC UPS battery reaches the end of its service life, replacing it with a genuine APC Replacement Battery Cartridge (RBC) is the fastest way to restore full protection and avoid the risk of an underperforming battery leaving your critical equipment exposed during a power event.
Indigi Power & Cooling supplies genuine APC RBC replacement batteries across Australia for the full range of APC Back-UPS, Smart-UPS, and Smart-UPS On-Line systems. Every RBC is supplied pre-charged, fully assembled, and backed by APC's 2-year repair or replace warranty. We also provide professional battery replacement installation for sites across Queensland, New South Wales, Victoria, and Papua New Guinea.
Contact us for a quote | 1800 046 344 | admin@indigipc.com.au
What Is an APC RBC?
An APC RBC (Replacement Battery Cartridge) is a factory-assembled battery module designed as a direct drop-in replacement for the original battery in your APC UPS. Each RBC is pre-wired, pre-charged, and sized to the exact specifications of the UPS model it is designed for, meaning replacement is a straightforward swap with no tools beyond a screwdriver required in most cases.
APC RBCs use sealed valve-regulated lead-acid (VRLA) battery technology, which is maintenance-free, spill-proof, and approved for use in office and data centre environments. Each genuine RBC is certified for 100% compatibility with its matched UPS model and ships with a 2-year repair or replace warranty from Schneider Electric.
APC RBC Range: Compatible UPS Series
Back-UPS Series
APC Back-UPS systems are used in home offices, small businesses, and light commercial environments. Common RBC replacements in this range include:
RBC2, RBC17, RBC32, RBC33, RBC40, RBC43, RBC45, RBC46, RBC47, RBC48
These units are compact, user-replaceable, and typically use 12V sealed lead-acid cells. Battery service life is generally 3 to 5 years depending on operating temperature and depth of discharge cycles.
Smart-UPS Line-Interactive Series
APC Smart-UPS line-interactive systems are the most widely deployed UPS in Australian commercial and IT environments. Common RBC replacements in this range include:
RBC2, RBC7, RBC24, RBC25, RBC55, RBC57, RBC59, RBC105, RBC106, RBC107, RBC108, RBC109, RBC113, RBC114, RBC115, RBC116, RBC117, RBC123, RBC124, RBC125, RBC130, RBC131, RBC132, RBC133
If you have a Smart-UPS 750, 1000, 1500, 2200, or 3000 model, your RBC number is printed on a label inside the battery compartment or listed in the UPS management software.
Smart-UPS On-Line Series
APC Smart-UPS On-Line (SRT, SMX, SURT) systems use double-conversion technology for the highest level of power protection. These systems typically use higher-capacity or multi-battery RBC configurations. Common part numbers in this range include:
APCRBC110, APCRBC118, APCRBC118J, APCRBC135, APCRBC136, APCRBC140, APCRBC141, APCRBC142, APCRBC143, APCRBC152, APCRBC153, APCRBC154, APCRBC155
The APCRBC140 for example covers the Smart-UPS On-Line 192V / 5.1Ah configuration with a 2-year repair or replace warranty from Schneider Electric.
Galaxy and Symmetra Series
For three-phase and large enterprise UPS systems in the APC Galaxy and Symmetra range, battery replacement is typically carried out as part of a scheduled maintenance programme. Indigi Power & Cooling provides supply and installation for these systems, including site assessment, battery string testing, and safe disposal of expired batteries in accordance with Australian regulations.
How to Find Your APC RBC Number
The RBC number for your UPS is printed on a label inside the battery access panel or on the base of the unit. It is also listed on the APC website by entering your UPS model number. If you are unsure which RBC you need, contact our team with your UPS model number and we will confirm the correct part.
Common UPS model number locations:
-
Rear panel label
-
Base of unit
-
APC management card or LCD display
-
Original purchase documentation
When to Replace Your APC UPS Battery
APC recommends replacing UPS batteries every 3 to 5 years under normal operating conditions. Battery life is shortened by:
-
High ambient temperatures above 25 degrees C (every 10 degrees above 25 degrees C roughly halves battery life)
-
Frequent deep discharge events such as extended power outages
-
High charge-discharge cycle count in environments with frequent short outages
-
Poor ventilation in the battery room or UPS enclosure
Signs your APC UPS battery needs replacement include:
-
Replace Battery LED indicator illuminated on the UPS front panel
-
Battery runtime has reduced noticeably
-
UPS fails self-test on startup
-
Battery alarm triggers under light load conditions
-
The UPS is more than 4 years old and has not had a battery service
Do not wait until a power event exposes a failed battery. A UPS with a degraded battery provides little or no protection and can cause more disruption than having no UPS at all.
Professional Battery Replacement Service
Battery replacement in a live environment carries risks if not handled correctly. APC UPS systems hold live charge even when powered down. Larger Smart-UPS and On-Line models can store significant energy in their battery strings.
Indigi Power & Cooling provides professional battery replacement services including:
-
Battery health assessment and runtime testing prior to replacement
-
Safe handling and hot-swap replacement in live environments where required
-
Correct torque and connection verification to APC specifications
-
Post-replacement self-test and runtime verification
-
Safe disposal and recycling of expired lead-acid batteries in compliance with Australian regulations
-
Documentation for WHS and asset management records
Battery replacement can be combined with a UPS preventative maintenance visit to reduce site attendance cost per service event. See our UPS maintenance services for more detail.
Why Choose Genuine APC RBC
Third-party UPS batteries are available at lower price points, but genuine APC RBCs carry important advantages for critical applications:
-
100% certified compatibility with matched APC UPS models
-
Pre-charged and factory tested before shipping
-
2-year repair or replace warranty from Schneider Electric
-
Correct internal resistance and capacity rating matched to UPS charge management circuitry
-
No risk of warranty voiding on the UPS itself
-
Designed and tested to APC safety and performance specifications
For home office or non-critical backup, third-party batteries may be acceptable. For data centres, server rooms, healthcare, industrial control systems, and any application where UPS reliability is essential, genuine APC RBC is the correct choice.
Supply and Installation Across Australia
Indigi Power & Cooling supplies genuine APC RBC replacement batteries and provides installation services across:
-
Brisbane and South East Queensland
-
Sydney and Greater NSW
-
Melbourne and Greater VIC
-
Regional Queensland, NSW, and VIC
-
Papua New Guinea
Request a quote for supply only or supply and installation. Our team can confirm the correct RBC for your UPS model and arrange delivery or an on-site service visit.
Related Products and Services
