Uninterruptible Power Supply Perth - UPS Installation, Maintenance & CRAC Cooling

Indigi Power & Cooling delivers UPS installation, UPS maintenance, CRAC cooling systems, and precision data centre cooling across Perth and Western Australia. WA's distance and its isolated power grid make reliable backup power and precision cooling mission-critical - a fault on a remote site can take hours to reach. We cover Perth CBD, West Perth, Osborne Park, Malaga, Welshpool, Canning Vale, Kwinana, Fremantle, Jandakot, and Perth Airport, and mobilise across Regional WA including the Pilbara (Karratha, Port Hedland), the Goldfields (Kalgoorlie-Boulder), the Mid West (Geraldton), the South West (Bunbury, Busselton), the Kimberley (Broome), and remote mine and industrial sites throughout the state.

Part of our national service network - we also operate in Brisbane and Queensland, Sydney and NSW, and Melbourne and Victoria.

---

Perth and Western Australia Power Market

Western Australia's economy is powered by mining and resources, and its critical infrastructure sits in some of the harshest operating conditions in the country. Inland and Pilbara sites regularly exceed 45 degrees Celsius in summer, which accelerates UPS battery degradation and places extreme load on cooling systems. Perth runs on the South West Interconnected System (SWIS), a standalone grid with no interconnection to the eastern states, so sites cannot rely on imported capacity during a shortfall - making on-site uninterruptible power supply and generator backup essential.

Key infrastructure sectors driving demand across WA include:

• Mining and resources - remote SCADA, process control, and communications across the Pilbara, Goldfields, and Mid West

• Oil, gas, and heavy industry - LNG, refining, and port infrastructure at Kwinana, Karratha, and Port Hedland

• Data centres and colocation - Perth's growing edge and enterprise data centre market in Malaga, Osborne Park, and the CBD

• Healthcare - metropolitan and regional hospitals, pathology, and remote clinics

• Government and defence - federal and WA state agency critical systems

---

UPS Systems Perth

Indigi supplies, installs, commissions, and maintains single and three-phase UPS systems across Perth and WA from Eaton, Vertiv Liebert, APC by Schneider Electric, PowerShield, and Socomec. For high-temperature Pilbara and inland sites we specify UPS and battery systems rated for the conditions, with lithium options for longer life at elevated temperatures. Browse UPS systems or learn more about our UPS maintenance services.

---

CRAC Cooling Systems Perth

Perth's hot, dry climate and the extreme heat of inland WA push server-room and data-centre cooling systems hard. A CRAC unit that is under-specified for a 45-plus degree Celsius ambient will struggle to hold temperature during summer peaks, and equipment rooms can overheat within minutes of a cooling failure. Indigi supplies, installs, commissions, and maintains DX, CHW, and CDW CRAC cooling systems across Perth and WA. Our ARC-licensed refrigeration technicians handle all refrigerant work to full compliance. View CRAC and precision cooling units.

---

UPS and CRAC Services Across Western Australia

We cover Perth and the full state - including regional and remote WA where critical infrastructure cannot afford downtime:

• UPS supply and installation Perth (single and three-phase)

• UPS preventative maintenance and servicing

• UPS battery replacement and testing, including high-temperature and lithium options

• CRAC unit supply and installation Perth

• CRAC maintenance and refrigerant handling (ARC licensed)

• Emergency UPS and CRAC breakdown response

• Design and deployment of integrated power and cooling solutions for remote sites

• Mobilised on-site services to the Pilbara (Karratha, Port Hedland), Goldfields (Kalgoorlie-Boulder), Mid West (Geraldton), South West (Bunbury, Busselton), Kimberley (Broome), and remote mine sites throughout WA

---

Why Perth Businesses Choose Indigi

• National provider mobilising to WA projects and scheduled service campaigns, with experience in remote and high-temperature sites

• Licensed electricians and ARC-licensed refrigeration technicians

• Multi-brand capability: Eaton, Vertiv, APC, PowerShield, Socomec

• Indigenous and Veteran-owned - Supply Nation and ICN Gateway registered, well suited to WA resources sector procurement

• Procurement-compliant for WA Government and Commonwealth agencies

---

How to size a UPS for your Perth site

Getting UPS sizing right is the difference between a system that rides through an outage and one that trips under load. For Perth and Western Australia sites we begin with a load audit, then specify capacity, runtime, and redundancy to match your operational risk. The key factors are:

• Connected load - total VA and watts of the equipment to be protected, plus headroom for growth

• Required runtime - how many minutes you need to ride through an outage or reach generator start

• Redundancy - N for basic protection, N+1 or 2N for data centres, hospitals, and other critical sites

• Load type and power factor - IT loads, motors, and medical equipment behave differently under UPS

• Input supply - single or three-phase, and the spare capacity in your switchboard

• Environment - Perth's conditions and the room temperature the batteries will actually see

---

Single-phase or three-phase UPS in Perth?

Most Perth offices, retail sites, branch offices, and small server rooms run single-phase UPS systems from 1kVA to 20kVA in tower or rack-mount form. Data centres, hospitals, and industrial sites across Western Australia typically need three-phase UPS from 10kVA up to several hundred kVA, often configured with parallel or N+1 redundancy and paired with precision CRAC cooling. We supply, install, and maintain both, and can advise which topology suits your load, budget, and available switchboard capacity.

---

UPS batteries: VRLA vs lithium

UPS runtime comes from its batteries, and battery choice drives both lifespan and total cost of ownership. Valve-regulated lead-acid (VRLA) batteries are the common, lower-cost option with a typical 3 to 5 year service life. Lithium-ion batteries cost more upfront but commonly last 8 to 10 years, tolerate higher operating temperatures, weigh far less, and recharge faster. In Perth's hot, dry summers and extreme inland heat, lithium batteries rated for high temperatures often pay off. Whichever you run, we test battery health at every visit using impedance testing, which detects degradation long before a runtime failure.

---

What a UPS installation in Perth involves

A typical UPS installation follows a clear path: site assessment and load audit, system and battery selection, delivery and positioning, electrical connection by a licensed electrician, commissioning and load testing, then handover with full documentation. For occupied Perth sites we work around your maintenance windows, and systems fitted with a maintenance bypass switch can often be installed or serviced without interrupting the protected load.

---

Reducing UPS downtime risk in Perth

A single unplanned outage can cost thousands in lost productivity, corrupted data, and emergency callout fees. Reactive, emergency repair consistently costs more than planned maintenance - preventive servicing can cost up to three times less than emergency repairs over the life of a UPS system.

For Perth and Western Australia operations that cannot tolerate downtime, we combine a correctly-sized UPS, precision CRAC cooling, scheduled preventative maintenance, battery impedance testing, and 24/7 emergency response, so a mains failure, a degrading battery, or a cooling fault is detected and resolved before it takes your systems offline. New sites can start with a one-off assessment and move onto a scheduled maintenance plan once we have a baseline health report.

---

Australian standards and compliance

Every UPS and CRAC installation we deliver in Perth and Western Australia is carried out by licensed electricians and, for cooling, ARC-licensed refrigeration technicians, aligned with the relevant Australian Standards:

• AS/NZS 3000 - Wiring Rules, for safe electrical installation and connection to switchboards

• AS/NZS IEC 62040 - general and safety requirements for uninterruptible power systems

• AS 4044 - safety requirements for stationary battery installations

• AS/NZS 3003 - electrical installations in patient care areas, for hospitals and healthcare

We can provide documentation referencing these standards for insurance, audit, and compliance purposes on request.

Frequently Asked Questions

Do you supply uninterruptible power supply systems in Perth?

Yes - Indigi supplies, installs, and commissions single and three-phase uninterruptible power supply (UPS) systems across Perth and WA from Eaton, Vertiv Liebert, APC, PowerShield, and Socomec, including high-temperature and lithium battery options for hot inland and Pilbara sites.

Do you provide UPS installation in Perth?

Yes - we install single and three-phase UPS systems across Perth CBD, Osborne Park, Malaga, Kwinana, Fremantle, and throughout regional WA including the Pilbara, Goldfields, Mid West, and South West. We supply and install Eaton, Vertiv Liebert, APC, PowerShield, and Socomec.

Do you service remote mine sites in WA?

Yes - we mobilise to remote and mining sites across the Pilbara, Goldfields, and Kimberley for UPS installation, maintenance, battery replacement, and CRAC cooling, and we specify equipment rated for high-temperature and dusty conditions.

What areas of WA do you cover?

We cover Perth metro - including West Perth, Osborne Park, Malaga, Welshpool, Canning Vale, Kwinana, Fremantle, and Jandakot - plus all of Regional WA: the Pilbara (Karratha, Port Hedland), Goldfields (Kalgoorlie-Boulder), Mid West (Geraldton), South West (Bunbury, Busselton), the Kimberley (Broome), and remote mine and industrial sites throughout the state.

---

Ready to talk to a WA UPS and CRAC specialist? Call 1800 046 344, or send us a message.

Back to Service Locations Australia | Brisbane and Queensland | Sydney and NSW | Melbourne and Victoria