The Uniflair MB is a wall mounted cooling unit installed on the outside of a conditioned space, such as a telecom enclosure. These units are completely self-contained, meaning they are shipped completely charged and there is no need for a remote heat exchanger. These rapidly deployable units only require simple electrical wiring and mounting to the shelter. Available in a free cooling configuration, these units come equipped with motorized dampers to enable use of the outside air to help cool the IT space

Availability

• Dual power inputs - (Optional) Dual power supplies for incoming power redundancy
• Redundant Components - Single points of failure in the system have redundant components to maintain availability and reliability.
• Direct drive motors - Stress on bearings is nearly eliminated, increasing useful life. Allows integral fan/motor assembly to be factory balanced, which lowers vibration and expedites startup.
• Active response control - Monitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and status of the unit is provided.
• Scroll compressors - Utilize few moving parts for increased reliability and life expectancy.

Manageability

• Network interface - Provides management by connecting the device directly to the network with a dedicated IP address, avoiding the need for a proxy such as a server. Management is available via Web browser, Telnet or SSH. Notification features inform you of problems as they occur.
• Building Management Systems - Units are designed to work with the most common BMS systems including BACnet and Modbus.
• Local area network - Creates a shared control between all the available resources for maximum energy efficiency and controlled management of the group during emergency situations
• Microprocessor controller - Provides proactive control and real-time monitoring via a four line, eighty character, alphanumeric display.

Serviceability

• Service monitoring - All the monitoring devices on board the unit allow for preventive maintenance and a check of the working condition of the system while its in operation.
• Easy service access - Allows for all serviceable components to be replaced/maintained by easily accessible panels/doors.
• Operational Service - Allows critical components to be maintained/replaced while the system is in operation.

Total cost of Ownership

• Direct Free Cooling - Utilizes outdoor air when ambient air temperature can help support cooling loads.
• High performance technological solutions - Optimize the unit operation at any load or ambient condition, guaranteeing an extremely low power consumption
• Modular strategy - Modular design of the mechanical and control systems allow for gradual build-up of the cooling infrastructure to match the cooling demand of the facility. This greatly reduces CAPEX expenditure and provides deferred investment throughout the life of the facility.