Vertiv Liebert GXE  /  Essential Online UPS  /  6kVA to 10kVA

The Vertiv Liebert GXE 6000-10000VA range brings true online double conversion protection to higher-capacity single phase loads without the premium price tag of the flagship GXT5 platform. It is Vertiv's essential and affordable line: the same fundamental topology that fully isolates and regenerates your power, offered as a value option for server rooms, comms rooms and edge computing sites that need dependable, fully conditioned power on a sensible budget. Because it runs at a unity output power factor of 1.0, a 6kVA unit delivers a full 6000 watts and a 10kVA unit a full 10,000 watts of usable real power, so you never lose headroom to a derated wattage figure the way you do with a 0.9 power factor UPS.

Online double conversion (VFI classification) means the connected load is always powered from a freshly regenerated sine wave, completely isolated from the raw mains. Voltage sags, surges, frequency drift, harmonics, electrical noise and brownouts never reach your equipment, and there is no transfer time to battery because the inverter is always carrying the load. For a rack of servers, storage and networking, or a distributed edge node where a site visit is expensive, that continuous protection is exactly what keeps hardware alive and workloads running. The GXE 6-10kVA range hardwires directly into your distribution board through line, neutral and ground terminals on both input and output, giving a clean, permanent connection suited to fixed installations. Indigi Power and Cooling supplies both models Australia-wide with optional installation, commissioning and ongoing maintenance from our Brisbane, Sydney and Melbourne hubs.

Vertiv Liebert GXE 6kVA to 10kVA overview

Vertiv Liebert GXE essential online double conversion UPS, fit for the edge, from 6kVA to 10kVA.

Why the GXE 6-10kVA range leads on value

The GXE 6-10kVA line uses valve-regulated, non-spillable lead acid (VRLA) batteries, the proven, cost-effective chemistry that keeps the upfront price down while still delivering dependable backup. Where the premium GXT5 5-20kVA range adds lithium options, an included network card and a longer warranty, the GXE range is the deliberate value alternative: the same online double conversion protection and unity power factor, sized for teams who need reliable higher-capacity backup without paying for the top tier. If your requirement is critical enough to justify the premium platform, the GXT5 range steps up alongside it; for most server rooms and edge deployments, the GXE 6-10kVA hits the sweet spot of price and protection.

GXE 6-10kVA specifications

GXE 6kVA and 10kVA at a glance

The GXE higher-capacity line comprises just two models, so choosing between them is simple: match the model to your total connected wattage and the rack space you have available. Both share unity power factor, hardwired connection, VRLA batteries and the same 2-year warranty.

Note that internal runtimes are deliberately short because these units are designed to run with external battery cabinets sized to your outage profile. Add up to four cabinets per unit to extend backup for longer utility interruptions or to comfortably bridge the start of a standby generator. Use our sizing tools and team to match runtime to your real risk rather than guessing.

Applications for the GXE 6-10kVA range

At 6kVA to 10kVA of real power the GXE higher-capacity line is built for the loads that sit between a single rack and a full data hall: a populated server rack, a small comms room, a distributed edge site or a branch office that needs its infrastructure protected on a budget. Because it is online double conversion rather than line-interactive, it suits sites with unstable, generator-backed or long-feeder power where voltage and frequency wander and cheaper topologies fall short.

• Server rooms and populated racks running virtualised compute and storage
• Edge and micro data centre sites in retail, industrial, mining and remote locations
• Comms rooms, core network switching, routing and firewalls
• Branch office and campus IT rooms needing affordable higher-capacity backup
• Building management, security and control systems on critical sites

To see the full higher-capacity and premium options side by side, browse the Vertiv single phase UPS range, and if you are protecting a full rack or room, pair the UPS with cooling through our server room cooling service. Not sure of your runtime target? Use the UPS runtime and battery sizing calculator to size internal and external battery capacity before you order.

GXE 6-10kVA vs a typical line-interactive UPS

The most common mistake at this capacity is choosing a line-interactive UPS to save money. The GXE range is already the value online option, so you get affordable pricing without giving up true online protection. The table below shows why the online double conversion GXE is the safer choice for critical higher-capacity loads.

If your deployment demands the premium platform, with lithium battery options, an included network card and extended warranty, the Vertiv GXT5 5-20kVA range is the step up. The GXE 6-10kVA is the deliberate value alternative for teams who want proven online double conversion protection at an essential price.

Installation and maintenance across Australia

Because the GXE 6-10kVA units are hardwired with line, neutral and ground terminals on both input and output, they must be connected by a licensed electrician as a fixed installation. Indigi Power and Cooling provides single phase UPS installation and commissioning nationally, including rack or tower placement of the 70kg and 80kg chassis, battery cabinet connection, load transfer and configuration of the communications and shutdown software. All fixed electrical connection work must comply with AS/NZS 3000 wiring rules.

To protect your investment and keep the warranty valid, batteries and electronics should be inspected on a regular schedule. Our UPS maintenance service covers testing, battery health checks and firmware updates, and annual maintenance plans keep your GXE fleet compliant and reliable. External battery cabinets, the GXE3-EBC192VRT2U for the 6kVA and the GXE3-EBC240VRT3U for the 10kVA, extend runtime when you need it, and up to four can be added per unit.

Australian sites bring their own power quality challenges, from long feeder runs and voltage sag in regional areas to generator changeover on backed-up sites, and these are exactly the conditions online double conversion is built to ride through. Indigi Power and Cooling handles the electrical side of the deployment for you, so each GXE unit is installed, labelled and commissioned correctly the first time, sized against your real load and runtime target rather than a rule of thumb.

Frequently asked questions

How many models are in the GXE 6-10kVA range?

Two: the 6kVA GXE3-6000IRT4UXL in a 4U chassis and the 10kVA GXE3-10KIRT5UXL in a 5U chassis. There is no 8kVA model in this higher-capacity GXE line, so selection comes down to matching your total connected wattage to one of these two units.

Does the GXE 6-10kVA have unity power factor?

Yes. Both models run at a unity power factor of 1.0, so the 6kVA delivers a full 6000 watts and the 10kVA a full 10,000 watts of real, usable power, letting you protect more equipment per unit than a 0.9 power factor UPS of the same VA rating.

Is the GXE hardwired or plug connected?

Both units are hardwired, with line, neutral and ground terminal connections on the input and output. They are designed as fixed installations and must be connected by a licensed electrician in accordance with AS/NZS 3000 wiring rules.

How efficient is the GXE 6-10kVA range?

Efficiency reaches up to 94% in online double conversion mode and up to 98% in ECO mode, which lowers running cost and reduces the heat the UPS adds to the room, easing the load on your cooling system.

Can I extend the backup runtime?

Yes. Each unit accepts up to four external battery cabinets, the GXE3-EBC192VRT2U for the 6kVA and the GXE3-EBC240VRT3U for the 10kVA, so runtime can be scaled from a few minutes to well over an hour to cover longer outages or a generator start.

How does the GXE compare with the GXT5?

The GXE 6-10kVA is Vertiv's essential, affordable online double conversion line and the value alternative to the premium GXT5 5-20kVA range. Both offer true online protection and unity power factor; the GXT5 adds features such as lithium battery options, an included network card and a longer warranty, while the GXE keeps the price down with VRLA batteries and a 2-year warranty.

What warranty comes with the GXE 6-10kVA?

Both models carry a 2-year warranty covering electronics and batteries. Regular maintenance and correct, compliant installation keep the warranty valid, and Indigi Power and Cooling supplies, installs and maintains the range nationwide.

Related products and services

• Full Vertiv single phase UPS range
• Vertiv Liebert GXT5-5000IRT5UXLN 5000VA premium online UPS
• Vertiv Liebert GXT5-10KIRT5UXLN 10kVA premium online UPS
• Vertiv Liebert GXT5-3000IRT2UXL 3000VA online UPS
• Single phase UPS installation and commissioning
• UPS maintenance plans

Get GXE 6-10kVA pricing, stock and installation Tell us your load, site and runtime target and we will size, supply and install the right Vertiv GXE UPS. Indigi Power and Cooling is Indigenous and Veteran-owned, Supply Nation and ICN Gateway registered. Contact Indigi Power and Cooling